Alliance posts $50.8 million loss for 2012

Alliance posted its annual result on Friday which was every bit as bad as predicted, a net after tax loss of $50.8 million for the 12 months ended September, writes meat industry commentator Allan Barber in his recent blog post.

The result included restructuring costs of $13.5 million associated with the closure of the company’s Mataura sheep and lamb processing operations which followed similar costs of $19.4 million the previous year from the closure of its Sockburn plant.

The 2012 performance saw a $77.8 million deterioration at the operating level compared with 2011 which, despite the $9 million net after tax loss, produced an operating profit of over $20 million.

Chairman Owen Poole expressed his disappointment at Alliance’s first operating loss for 20 years which he attributed to the decline in the sheepmeat market exacerbated by the high New Zealand dollar and the unsustainable level of procurement costs earlier in the season.

In the 2012 financial year, Alliance was hit by a triple whammy of lower sales and product prices, ridiculously high livestock procurement prices driven by short supply pre-Christmas, and the high dollar. The strength of the dollar was in no way reflected in a realistic procurement market. There is a question whether other processors were equally affected or saved to some extent by a higher proportion of beef processing in their operations. This will be at least partially answered when Silver Fern Farms releases its result later this month.

One factor which Poole omitted to cover in detail was the significant impact of the last two years on the balance sheet which he said was “still robust”. Unfortunately, the equity ratio has declined from 81.5 percent in 2010 to 51 percent two years later. Clearly, it cannot keep declining at this rate for much longer, so the company’s board will be hoping fervently that markets will recover and livestock supply at least stabilise in the immediate future.

Poole referred in his statement to the operational upgrades to Mataura’s beef processing, venison processing at Smithfield and rendering at Lorneville which, when combined with the savings from closures, will lead to much improved efficiencies and a significantly better result for the current year. Growth of lamb sales to China, sales to Brazil, the contract with Marks & Spencer and better market outlook encourage some optimism for this year.

Longer-term, the sheep population is unlikely to increase to any great extent, although productivity can be expected to improve with genetics, technology and lambing percentage increases. Whether this will be enough to maintain the industry in its present configuration is doubtful, because individual processors will continue to look for efficiency gains. Silver Fern Farms is already thought to be planning a nightshift at its Gore plant to take advantage of the closure of Mataura.

Meat industry capacity adjustments and potentially company ownerships can be expected to change in response to market conditions. No different from normal!

Allan Barber is an agribusiness and meat industry commentator. This article has appeared at www.interest.co.nz. He writes his own blog at Barber’s Meaty Issues.

Chuffed to be recognised by peers

Lamb processor Craig Hickson was “chuffed” when he learned he was to be awarded the 2012 Allflex Federated Farmers Agribusiness Person of the Year in July. Adding a new Welsh meat plant to his business portfolio this year too, makes it one to remember in his business journey.

“It’s very pleasing to be recognised by your peers,” admits the managing director of Progressive Meats.

The astute Hawke’s Bay businessman’s speciality has lain in seeking solutions for plant processes that meet modern demands and also for challenging convention. Over most of the last 40 years (up to 2007) he has been in operation, the straight speaking Hickson has deliberately steered away from direct involvement in exporting leaving others to concentrate on that while he has focused on the niche of contract processing product for exporters.

Recognised as one of the meat industry’s leaders, he holds a seat on the Meat Industry Association (MIA) council and represents industry on the boards of Beef+Lamb NZ Ltd and the New Zealand Meat Board and an assorted array of other directorships.

Born in Canada to Kiwi parents, the young Craig Hickson was moved to Waipukurau when he was three months and later, at age seven, to Havelock North. His schooling was completed at Hastings Boys High, with vacations spent working at the Hawke’s Bay Farmers Meat Company Whakatu works, before he progressed on a HBMC scholarship to Massey University. There, he graduated with a B Tech in food technology, specialising in the engineering side – which has stood him in good stead through several new plants and plant renovations since. Later, he added a BA in economics and marketing to his list of accomplishments.

However, at that stage, pure food technology was not for the young red-headed Hawke’s Bay lad. In 1975, he found himself a job at the Meat Producers Board as product development officer, before leaving in 1980 to develop his own business – a small lamb packing plant in Hastings, Progressive Meats, which opened with his wife in October 1981.

In order to satisfy customer demand for contract services over the years, the Hicksons were involved with a few others in the ownership, design, planning, contruction and operation of Lamb Packers Feilding Ltd and Progressive Gisborne Ltd – and also with Lean Meats Oamaru through a minority shareholding in Lean Meats Ltd.

Having sold their 50 percent share in Feilding and Gisborne to Bernard Matthews NZ Ltd (BM) in 2005, Hickson was part of a syndicate that bought 100 percent back again in 2007 – the same slaughter and processing plant in Gisborne, and slaughter plant in Feilding plus a further processing plant in Waipukurau – when BM decided to withdraw from New Zealand to concentrate on its UK operations.

New meat plant in Wales

Matching supply to demand is also the reason for the purchase in April this year of a small Welsh meat processing plant Cig Calon Cymru (pronounced kig kalon – like talon – kumru, roughly translated as ‘Meat from the heart of Wales’), at Crosshands, near Lllanelli in South Wales. The plant is principally a beef processor, with a small lamb line.

Hickson explained that they had been looking for a suitable processing opportunity in the area to supply lamb year round to British consumers – the British and New Zealand lamb production is largely complementary for chilled. This enables New Zealand lamb to be supplied during the December to May period, when Welsh lamb is in short-supply and then Welsh lamb during the June to November period, when New Zealand lamb is in shorter supply benefiting both sets of producers. It will go into the same packaging with the country of origin clearly labelled.

The name of the company will remain as is and the plant will continue to process beef, but the branding for CCC product is yet to be determined. The management team will include New Zealander Jim Goodall who has the role of general manager. According to Hickson, plant staff are pleased that the company will have a new lease of life, while the local farmers are “reserving their judgement”.

Federated Farmers here have welcomed the initiative as it sees the move is an example of the vertical integration called for in several recent reports and shows there is life in New Zealand’s traditional markets. However, it is not novel, maintains Hickson pointing to Silver Fern Farms’ previous ownership of Brooks of Norwich, which enabled it to process frozen cuts to retailers’ exacting specification in-market, and other New Zealand companies, such as Alliance, Affco and Anzco, which have had in-market representation for many years and, in some instances, association with local processors.

He’s pleased there’s a ‘family’ connection too. The Hicksons own a 1,500ha farm in Hawke’s Bay and the farm manager’s wife, Denise, is Welsh, hailing from St Clairs which is near where the new plant is situated.

Slow product development

Hickson has observed very slow progress of new meat product development in terms of ready-to-eat products over the past four decades since his graduation.

“The major development area has been in the form of natural cuts and portion-size,” he says.

One fundamental reason he gives for the slow development of lamb ready meals is that lamb is a relatively high priced meat as a competing ingredient. Another is the fact that the nature of lamb fat means that it solidifies at a higher temperature than beef or pork making it tricky to work with. It is best served hot or cold, not warm.

One famous product victim of the rising price of lamb was the Bernard Matthews lamb roast, a frozen product that did very well in Britain. The concept was based on the company’s technology and marketing machinery for its famous turkey roast and was so successful it led to a plant being built here in Waipukurau to manufacture the lamb version.

The product did very well until the price of lamb increased beyond what this market segment would support, he explained, and  volumes diminished to extinction. By then, BM had developed lines in chilled and frozen portion-controlled and weight-ranged lamb products for its range.

The new McDonald’s lamb burger, which has been trumpeted about recently, is one of only two examples of a commercial lamb ‘fast food’ item. The other being a doner kebab made from lamb flaps.

Contribution to processes

Hickson believes his most valuable contribution to industry has been to plant processes. Progressive Meats was at the forefront of changes to shiftwork, which though it had already been in place in the ‘follow on departments’ in plants, it was not utilised in slaughter and boning rooms. He gained union agreement in 1986, following a five week strike, just over a year before implementation in 1988.

“Shiftwork enabled small plants to be competitive, through the improved utilisation of capital,” he says.

It was its work on relationships with farmers that enabled Progressive to be the first company in 1987 to offer forward commitment arrangements for lamb supply. “At the time, other industry participants thought forward commitments were not viable and would fail,” Hickson said. But they didn’t.

Progressive was also one of the first companies to move away from the Meat Board’s grading system, which had been designed for carcase specifications, and adapt it for its own customers’ specifications for cuts.

“We talked to our farmers and encouraged them through payments to produce lambs to specification.”

After legislation changed to ban smoking in the workplace, he embarked on a lengthy court fight to establish whether a purpose-built, negatively-pressured smoking room next to the cafeteria at Progressive’s Hastings plant was outside the ‘workplace’. The challenge was lost, but had a silver lining.

“The legal wording was ambiguous and I thought, had the room been deemed not  a workplace workers would not need to change clothes to go outside for a smoke, saving time, and their smoke wouldn’t disrupt other non-smoking employees.”

In the end, the court decided the room was ‘a workplace’ and workers did need to smoke outside the building. As Hickson himself is not a smoker, in fact he says he is “vitriocally opposed”, his support surprised his employees.

“Industrial relations have never been so good as just after that court decision,” he says, adding that the union financially contributed towards the defence of the case.

Looking to the future

Looking to the future, he commented that the Red Meat Sector Strategy (RMSS) is essentially a collation and synthesis of the views of industry participants.

“It didn’t deliver anything new but it is in a coherent form and advocates the development of future business along the lines of what, in many cases, is already going on,” he says.

However, ‘competition to buy’, tends to restrict the rate of progress to that of other competing companies in the field. While there is a high degree of consensus when interviewing participants one-on-one, it is a different matter when actions are observed in the cold commercial, competitive reality, he believes.

He sees the major challenge for the industry is for pastoral sheep, beef and deer farming to be a competitive land use option (at the margin) compared  to dairying, forestry, viticulture and horticulture, among other uses.

“In 40 years, I’ve seen a dramatic change in the Hawke’s Bay Heretaunga plains, which was once prime finishing land for livestock and is now covered in apples, crops grapes, and other viticulture.”

Lifting prices is an obvious target, but is constrained by the fact that lamb is already a relatively high priced meat, he believes.

“Reduction in wastage getting the product to consumers is another target as is endeavouring to negotiate a larger share of what the consumer pays with supermarkets and food service people generally taking between 30 to 50 percent of what the consumer pays.”

“Sheep are a dual product animal and we neglect wool at our peril,” he says. ”We need to be actively seeking new applications to lift demand and hence returns, particularly for the mid-micron and strong wool,that are traditionally used in carpet making. Wool hasn’t kept pace with lambing percentage increases, or inflation and if we could arrest the decline, and reverse the trend, sheep farming will be more profitable and grow.”

During his spare time, hobbies include managing his 60 hectare farm around he and his wife’s home in Haumoana, where he keeps deer near to the house, “nice to look at and easy to keep.” He has a love of classic cars and still owns the first one he bought when he was 19, a 1954 MG TF. He plays tennis and cricket and enjoys sailing on Lake Taupo.

When asked what was his most proud moment over his career to date, Hickson paused to reflect and said he had difficulty picking one moment as they blend into each other.

“I’ve never felt as though I’ve climbed a mountain, I’ve always been on a journey.”

+++

Craig Hickson

  • 1970 to 1973 – B Tech (Food), Massey University.
  • 1973 – Management trainee at Hawke’s Bay Farmers Meat Company, Whakatu.
  • 1975 – Joined Meat Producers Board staff as product development officer. Completed BA in Economics and Marketing Victoria University.
  • 1981 – Hicksons start small meat packing house Progressive Meats.
  • 1982 – Designs , builds and commissions small venison plant alongside Progressive Meats for ‘start up’ local farmer company, East Coast Venison.
  • 1987 – Plan and design venison plant in Feilding for East Coast Venison.
  • 1987 – Design, build and commision lamb slaughter at Progressive Hastings.
  • 1990 – Takes a minority interest in Lean Meats Ltd.
  • 1993 – Takes a minority interest in Te Kuiti Meats Ltd.
  • 1994 – Buys venison plant in Hastings and, with partner John Signal, the venison plant in Feilding from Venison New Zealand (formerly East Coast Venison).
  • 1995 – Builds Lamb Packers Feilding Ltd.
  • 1998 – Builds Progressive Gisborne Ltd.
  • 1999 – Builds replacement slaughter plant at Hastings (original only 13 years old).
  • 2003 – A principal in setting up Progressive Leathers Ltd at Whakatu.
  • 2005 – Sells Feilding and Gisborne Lamb interests to Bernard Matthews.
  • 2006 – Takes a majority interest in Te Kuiti Meats Ltd.
  • 2007 – Syndicate, including Hickson, purchases Bernard Matthews NZ Ltd’s lamb-processing and exporting operations in New Zealand and renames it Ovation New Zealand Ltd (plants at Gisborne, Waipukurau and Feilding).
  • 2012 – Allflex Federated Farmers Agribusiness Person of the Year.
  • 2012 – Hicksons purchase Welsh meat processor Cig Calon Cymru.

Current directorships: Progressive Meats Ltd, Ovation New Zealand Ltd, Lean Meats Ltd,Te Kuiti Meats Ltd, Progressive Leathers Ltd, MIA Council, Beef + Lamb NZ Ltd, Meat Board Ltd, Ovita Ltd. The Hicksons also farm sheep, beef and venison on 1,500 hectares in the Maraetotara/Elsthorpe district in East Coast Hawke’s Bay.

An abridged version of this article appeared in Food New Zealand magazine (October/November 2012).

 

Alliance getting ready for new season

Meat processor and exporter Alliance Group, like many others, has been busy getting ready for the new meat export season. The company has announced new plant and process modifications at two of its South Island plants, Pukeuri and Lorneville, recently. 

Additional shift and modifications at Pukeuri

Alliance is to provide an additional shift at its Pukeuri plant as it ramps up cattle processing in the peak period, the company announced last week.

The third shift at the plant north of Oamaru will enable the company to process 880 extra cattle a week through May and June when the cattle throughput traditionally hits its peak. the third shift will also offer about 80 existing employees from the sheep and lamb processing shifts a longer season.

Alliance Group is currently undertaking a number of modifications to the plant, including extending the cattle yards ahead of the change.

John Brader, general manager of processing at Alliance Group, says the additional third shift was necessary to ensure Alliance continues to meet the needs of its suppliers.

Alterations have been made in Alliance’s systems to accommodate the additional cartons, giving more flexibility to which blast freezers or equilibration chillers the product can be directed, he explained.

Pukeuri processes more than 10,500 sheep and lambs a day. More than 900 staff work at the plant, which is the largest employer in North Otago. It is estimated the plant injects around $100 million into the local economy each year.

New rendering plant at Lorneville

In addition, Alliance announced that it has also completed the construction of the building for a new $13 million rendering plant at it’s Lorneville plant near Invercargill. Rendering machinery is now being installed in the 1,121 square metre building. The facility, which is designed to reduce Alliance’s energy and operating costs, as well as improve product recovery, is expected to be commissioned in October.

The new plant incorporates the latest technology, including a Press Dewatering System, which uses less energy and produces high quality products. When fitted with a waste heat evaporator, the process is virtually ‘zero waste’, resulting in high product yields and low wastewater output.

The first stage in a larger rendering redevelopment project, two further stages are proposed in the future. The complete project is said to save 9,000 tonnes of lignite and more than 1.5 million hours of electricity a year, enough to power 170 homes a year, the company says.

John Brader says the new rendering plant represented the largest single investment at the Lorneville plant for more than a decade.

“Completion of the building marks a major milestone for the development. Rendering remains a significant contributor to Alliance Group’s income and the investment in the latest technology will ensure we maximise revenue in this area.

“Alliance measures energy use and the associated greenhouse gas emissions from its plant to assist in making good business decisions.

“Since 2000, Alliance Group has reduced greenhouse gas emissions from energy use at its processing plants by 26 percent per unit of production and total fuel use has been reduced by 32 percent.”

Almost 2,000 people are employed at Lorneville, which is New Zealand’s largest sheepmeat processing plant.